Akfen Engineering is a company with successful partnerships with its customers in terms of the plant establishment, installation, personnel training and commissioning of the plant in central Asia, Europe and Africa in the field of the installation of crude oil refinery Crude Oil (petroleum) Refineries and Operation Principles of the System
- 1- Cross-Section Distillation (Batch Type)
- 2- Continuous Distillation (Pipe Still)
- Crude oil (petroleum) consists of the fusion of hydrocarbons, which have molecular weight and boiling point of many different types. These hydrocarbons are separated into fractions by being reached to wide ranging boiling points by distillation process.. These are 1- Gas
- 2- Naphtha
- 3- Gas Oil
- 4- Diesel Oil
- 5- Heavy Fuels (Fuel Oil)
Distillation
Distillation is the process of enabling crude oil to evaporate partially at high temperature and then separating it by condensing again according to the temperature. One of the basic principles of distillation is that the substances to be separated have volatile features and allow high efficiency separation.
We decompose suitable petroleum derivatives with the help of an atmospheric distillation column. The system performs multiple distillation fractionalization.
Fractionation
Evaporation begins with the introduction of crude oil into the column. The evaporated oil rises according to its density and passes through the tray holes and through the filling material. The part that does not evaporate (the remaining liquid) descends to the lower part of the column. This process is called fractionation (phase separation).
The distillation column consists of 3 parts.
- 1-) Flash Zone (The Part Where Crude Oil Enters)
- 2-) Lower Part Reboiler (Raw Oil Spill Zone)
- 3-) Upper Part (Fractional Part)
The flash zone is the first part where crude oil enters the column. Crude oil coming from the furnace with high pressure and temperature enters the column. . Meanwhile, pressure drop occurs. Due to the pressure drop and high temperature, hydrocarbons with a low boiling range in the oil evaporate, move to the upper parts of the column and the decomposition process begins.
The lower part separates the light parts that are not desired to remain in the products at the buttom. This separation process is realized either by giving with the hot oil system from the bottom or by reheating (reboiler).
The upper part is the fractional part and the desired products are obtained from this part.
In the crude oil distillation project, manufacturing, assembly, training and commissioning processes are execuded by our company with our experienced staff and consultants by taking into account the basic principles of the process. .
In order to run and operate the process, the staff support and training, requested by our customers, are provided.
crude oil refinery plant, crude oil refinery plant installation
MODELS |
AK-HP 1000 |
AK-HP 2000 |
AK-HP 3000 |
AK-HP 5000 |
AK |
|
Daily Processing Capacity |
1.000.000 LT |
2.000.000 LT |
3.000.000 LT |
5.000.000 LT |
|
|
Total processing time |
24 Hours |
24 Hours |
24 Hours |
24 Hours |
||
Required factory field |
2.500 m2 |
2.800 m2 |
3.400 m2 |
4.000 m2 |
||
Products to Be Produced |
Naphtha, Kerosene, Diesel, Base Oil, Tar |
|||||
Raw materials |
Crude Oil (Fine Product Received or Not ) |
|||||
Operation System |
PLC Automation System or Semi-Automatic Manual System |
|||||
Lab |
Standard Basic Laboratory Equipments are Required for System Operation |
|||||
Heating Type |
Preheat Oven and Main Oven |
|||||
Heating Fuel |
Diesel, Natural Gas or Self-Produced Process Fuel |
|||||
Necessary Manpower |
4 Operators 8 Assistants |
6 Operators 12 Assistants |
7 Operators 12 Assistants |
9 Operators 16 Assistants |
||
Delivery time |
120 Workdays |
140 Workdays |
150 Workdays |
180 Workdays |
||
Assembly time |
40 Workdays |
45 Workdays |
60 Workdays |
80 Workdays |